Garage Door Services OKC

  Garage door openers make life easy—until they stop working. If you’re dealing with a malfunctioning opener, don’t panic. The issue could be as simple as dead batteries or as serious as a broken spring. In this blog, the experts in  Garage Door Spring Repair OKC  explain how to troubleshoot and fix common problems. Step 1: Check the Power Source Start with the basics: Make sure the opener is plugged in. Check your home’s circuit breaker. Try using both the wall button and remote. If there’s no response, it could be an electrical issue or internal motor failure. Step 2: Inspect the Remote and Wall Switch Replace the remote battery and see if the wall switch works. If the switch works but the remote doesn’t, you likely just need a new remote. Step 3: Look for Obstructions or Sensor Issues Garage door sensors (near the floor) can get blocked or misaligned. Make sure: They’re clean and aligned properly. The LED lights are solid (not blinking). If misaligned, gently adjust th...

 Electric garage doors are convenient—until a power outage or motor failure leaves you stuck. If you're in this situation, don’t worry. Our Garage Door Experts OKC from Affordable Garage Door OKC explain how to manually open your garage door safely and correctly. Step-by-Step Guide to Manually Open Your Electric Garage Door 1. Ensure Safety First Before doing anything: Disconnect the power (if it's not already out). Make sure the garage door is fully closed to avoid sudden movements. Use a flashlight if visibility is low. 2. Locate the Emergency Release Cord Look for a red cord hanging from the garage door opener trolley. This is the emergency release. 3. Pull the Cord Firmly pull the red cord down. This disengages the door from the motor, allowing you to lift it manually. 4. Lift the Door Carefully With the motor disengaged: Grip the bottom of the door. Lift it straight up using steady force. It should stay in place if the springs are in good con...